PROGRAMMING THE THERMOSTAT
5
Set 5+1+1 Program Schedule
To customize your 5+1+1 program schedule, follow these steps
Weekday:
Saturday:
Select
HEAT or COOL using the SYSTEM key.
Note: You have to program heat and cool each separately.
Press
MENU
Press
SET SCHED. Note: Monday-Friday is displayed and the WAKE icon is shown. You are now
programming the
WAKE time period for the weekday setting.
Time is flashing. Use the or key to make your time selection for the weekday
WAKE time
period. Note: If you want the fan to run continuously during this time period, select
ON with the FAN key.
Press
NEXT STEP
The setpoint temperature is flashing. Use the or key to make your setpoint selection for the
weekday
WAKE period.
Press
NEXT STEP
Repeat steps 4 through 7 for weekday
LEAVE time period, for weekday RETURN time period, and for
weekday
SLEEP time period.
Repeat steps 4 through 7 for
Saturday
WAKE time period, for
Saturday
LEAVE time period, for
Saturday
RETURN time period, and
for Saturday
SLEEP time period.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Sunday:
Repeat steps 4 through 7 for
Sunday
WAKE time period, for
Sunday
LEAVE time period, for
Sunday
RETURN time period, and
for Sunday
SLEEP time period.
10.
Additional step if R251W indoor remote sensor is connected.
The
T955W master thermostat will either average all sensors (system average) or only use
one sensor for the system ambient temperature (priority). The default setting is
SYSTEM
AVERAGE, which means all sensors are averaged to create the system average ambient
temperature reading. The
NEXT ZONE key can be pressed to change the priority.
The system information area of the display shows the priority.
For Example:
There is an
R251W connected and it is named REMOTE 1. If the NEXT
ZONE key is pressed until REMOTE 1 is shown, then the REMOTE 1 ambient temperature
reading will be used exclusively for that time period. All other sensors will be ignored.
