www.PrecisionRatedOptics.com | 888-545-1254
3
PM-100 Series
3 Safety Information
Warning
•
Never look directly into optical outputs or a fiber while the equipment is on. Invisible and visible laser
beam may damage your eyes.
•
Do not short-circuit the terminal of AC adapter I charger and the batteries. Excessive electrical current
may cause personal injury due to fumes, electric shock or equipment damage.
•
Connect AC power cord with the equipment and wall socket properly. While inserting the AC plug, make
sure there is no dust or dirt on the terminals and both plugs are fully seated. Incomplete engagement may
cause fuming, electric shock or equipment damage and may result in personal injury.
•
Do not operate the equipment near hot objects, in hot environments, in dusty/ humid atmosphere or when
condensation is present on the equipment. This may result in electric shock, product malfunction or poor
performance.
4 Preparing for Operation
4.1 Unpacking the instrument
Packing material
We suggest that you keep the original packing material. Using the original packing material is your guarantee of
protecting the instrument during transit.
Standard Accessories:
Power Meter, User Manual, Worldwide Compatible AC/DC Power Adaptor, Test Report, Adaptors: FC/PC,
SC/PC, ST/PC, Built-in 2.5mm Universal Adaptor, Li-ion Battery, Carrying Case
Checking for damage in transit
After unpacking the instrument, check to see whether it was damaged in transit. This is particularly likely if the
outer casing is clearly damaged. If there is damage, do not attempt to operate the instrument or to repair it without
authorization. Doing so can cause further damage and you may lose your warranty qualification.
4.2 Discharged batteries
There is a battery indicator on the screen to show the remaining charge. There are four status the indicator may
show, full, with 2 blacks, with 1 black and empty. If an empty battery indicator flashes it means the power is
almost out, and that is when you should recharge the batteries by connect the AC adapter with the instrument. If
the discharged batteries get to their limitations after long-time use, please replace it with a new one. To replace
the batteries, please remove the battery plate on the back of instrument with a screwdriver.
When the battery charge is extremely low to supply the necessary power, the instrument will automatically switch
off.
Note:
The AC indicator is not displayed when power is supplied by battery. To eliminate the possibility of acid
leakage, please take out the battery if the unit is not used for a long time.
