Pro-X XW-IS4, Руководство пользователя, Страница: 11 / 30

When the set works in Full Duplex, press “ALL” button to quit all IS-HS/IS-BP from
intercom and the set works in Half Duplex. Base Station “CHx” status indicator stays
on, IS-HS “SYS” LED stays on, IS-BP LCD displays “Half Duplex”.
3.Base Station communicates with selected IS-HS/IS-BP in Half Duplex
When the set works in Full Duplex, press and hold Base Station “CHx” button for 3s,
IS-HS/IS-BP of the corresponding channel will be communicating with Base Station
in Half Duplex. Base Station “CHx” status indicator flashes slowly (500ms ON,
500ms OFF), IS-HS “SYS” LED stays on, IS-BP LCD displays “Half Duplex”.
Mute Mode on Base Station
When Base Station is in intercom with Headsets, press “MUTE” button and “MUTE”
LED will be on. All IS-HS/IS-BP and 4-Wire/2-Wire “AUX” output cannot hear sound
from Base Station. Re-press “MUTE” button to cancel Mute mode, “MUTE” LED will
be off.
IS-HS/IS-BP Calls Base Station
When Base Station “MUTE” LED is on or “CHx” button has been pressed to make
selected channel mute, cameraperson is able to press IS-HS “CALL” button/IS-BP
“Call” button to call Base Station. Base Station “CHx” status indicator will flash
quickly (200ms ON, 200ms OFF), IS-HS “SYS” LED will flash quickly (200ms ON,
200ms OFF), IS-BP LCD will display “Call”. Press Base Station corresponding
“CHx” button to allow the IS-HS/IS-BP come into Full-Duplex intercom.
Remarks: 1. When a IS-HS/IS-BP is mute by pressing corresponding “CHx” button
on Base Station, the IS-HS/IS-BP can't intercom with Base Station or other IS-
HS/IS-BP by pressing IS-HS “MIC” button or IS-BP “Talk” button, unless it calls Base
Station to enable the intercom channel first.
2. “CHx” status indicator flashes quickly before stays on, IS-HS “SYS” LED flashes
quickly before stays on, IS-BP LCD displays “Call” before showing “Half Duplex”
again.
IS-HS/IS-BP Communicates with Base Station in Half Duplex
When Base Station is just turned on or all IS-HS/IS-BP work in Half Duplex, press
and hold a IS-HS “MIC” button/ IS-BP “Talk” button, it can be included in Full Duplex
intercom temporarily. Base Station “CHx” status indicator flashes (3s OFF, 1s ON);
release “MIC” button, the set gets back to work in Half Duplex.
2.Base Station communicates with all IS-HS/IS-BP in Half Duplex
9