Pro World TransPro Plus 1620, Руководство пользователя

Страница: 3 / 14

2. Connecting the System
2.1 Connect the power cord into a
properly grounded electrical outlet with
a sufficient amperage rating.
2.2 VOLTAGE: 120 Volt – The GS-601
requires a full 20 amp grounded circuit
for 120 volt operation. 240 Volt –The
GS-601 requires a full 10 amp grounded
circuit for 240 volt operation.
2.3 EXTENSION CORDS If used, should
be as short as possible and not less than
12 gauge.Heavy duty cords are
recommended.
2.4 CIRCUITS that have less than 15
amps or that have other high demand
equipment or appliances(especially more
than one heat seal machine) plugged in,
should not be used.
CAUTION: Failure to follow these
instructions will cause:
1. Erratic controller functions.
2. Inaccurate displays & slow heat-up.
3. The circuit breaker to disengage.
NOTE: If the supply cord is damaged, it
must be replaced by the manufacturer,
its service agent or a similarly qualified
person in order to avoid hazard.
3. Change To Auto Mode/Manual Mode
3.1 Turn around “Ramspin” system into
picture position, machine works under
automatic mode. Once close the
machine,electromagnet works to hold
machine closed. Once time is counting
down to zero,machine will auto open.
3.2 Turn the “Ramspin” system into
picture position,machine works under
manual mode. Once close the machine,
electromagnet does not work to hold
machine closed. Once time is counting
down to 0, machine needs to be opened
by hand.
Control Panel Guide