www.pro-wax-100.com
11. Use this WAX SPA only for its intended use as described in the instruction
booklet.
SAVE THESE INSTRUCTIONSI !!!
-Usage instructions-
WARNING - Always test temperature of the water before putting hands into the WAX
SPA.
1. Place the collar ring on the rim of the SPA.
2. Remove the plastic lid from the WAX SPA.
3. Adjust the wax-can holder on the wax can for easy handing.
4. Turn the temperature control knob and set the dial on "100" until the wax achieves
a liquid consistency. This process lasts approximately 15 minutes. For faster heating
place the lid on the warmer.
5. Once liquid, place the dial in middle place. The temperature will remain constant
throughout the day. It is important to test the temperature of the wax by placing a
small quantity on the inside of wrist, adjusting the dial accordingly.
6. When the wax is finished. lift out the can. Using the wax-can holder while the
warmer is still warm.
7. Turn the warmer of every evening by full turning the dial counter clock wise. Cover
the warmer with the clear lid to keep the wax dust-free.
8. To clean the warmer, use wax clean with the machine off and while the warmer is
still slightly warm.
9. For a new usage, repeat steps 1 to 7.
CAUTION-EXTREMELY HOT WATER MAY CAUSE BURNS.
For professional use only.
For best results, be sure to read all instructions thoroughly before using the WAX
SPA.
