Pro Video VDP-5000 Скачать руководство пользователя страница 3

Cleaning

Unplug this product from the wall outlet before cleaning. Use a damp (not wet) cloth

for cleaning. Do not clean the cabinet with liquid cleaners, aerosol cleaners, gasoline or other
types of flammable fluids.

Water and Moisture

Do not use this product near water. For example : near a bath tub, wash

bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; etc. Do not use
any component of this system in an exposed outdoor area, unless the instructions clearly state
that it is safe to. Do not operate this system in the presence of explosive or flammable fumes.

Overloading

Do not overload wall outlet, extension cords, or integral convenience receptacles

as this can result in a risk of fire or electric shock.

When Not in Use

If no one is at home for extended periods of time(like vacations, etc.) this

product should be unplugged or turned off for the purpose of energy conservation and safety.

Power Source

The monitor should be operated only from the type of DC adapter packaged in

this box. When connecting additional monitor, also use additional DC power adapter for that
monitor

Disconnecting

Never carry the product by its cord, or yank it to disconnect from an electrical

outlet; instead, grasp the plug and pull to disconnect. Keep the cord away from heat, oil and
sharp edges.

Object and Liquid Entry

Never push objects of any kind into openings on this product as they

may touch dangerous voltage points or short out parts. This could result in a fire or electrical
shock. Never spill liquid of any kind on the product.

Ventilation

This product should be situated so that its location or position does not interfere

with its proper ventilation. For example, the product should not be situated on a bed, sofa, rug,
or similar surfaces that block ventilation openings; or placed in a built-in installation, that
prevents an air flow around the product.

Servicing

Do not attempt to service this product yourself, as opening or removing covers may

expose you to dangerous voltage or other hazards. Refer all servicing to qualified personnel.

Damage Requiring Service

Unplug this product from the wall outlet and refer servicing only to

qualified service presonnel under the following conditions :

A. When the power supply cord or plug is damaged.
B. If liquid has been spilled, or objects have fallen into product.
C. If the product has been exposed to rain or water or other liquids.
D. If the product does not operate normally by following the operating instructions. Adjust

only those controls that are covered by the operating instructions. Improper adjustment
of other controls may result in damage and will often require extensive work by a
qualified technician to restore the product to its normal operation, not covered under
manutacturer’s warranty. Do not attempt to service this product beyond that described
in the operating instruction manual.

E. If the product has been dropped or damaged in any way.
F. When the product exhibits a distinct change in perfomance, this indicates a need for

service.

3

Содержание VDP-5000














Отзывы: