pro user DRC4310Solar, Руководство по эксплуатации

Страница: 13 / 58

13
Picture Specs:
After entering this menu, first select the respective camera (camera 1 or camera 2). Then select if you
wish to adjust the
brightness , the contrast or the colour of the picture. Use the arrow keys to adjust.
Go back by pressing the MENU-button.
Picture Direction:
In the Menu “Picture direction” you can change the orientation of the picture. These different views
allow you to mount the camera upside down, but still keep the right picture on the monitor. First select
the respective camera (camera 1 or camera 2). The orientation of the picture will change every time
pressing the ENTER-button. To save the settings and exit the screen, please press the MENU-button.
SETUP
Select the desired sub-menu:
- Pairing:
In this menu, you can pair the camera to the monitor. This system can make use of 2 camera-
units. First select the camera you want to pair (PAIR-1 fpór camera 1 or PAIR-2 for camera2).
Now press the pairing-button (6) of the camera unit with the delivered needle or a paper clip
until camera pairing is confirmed and the camera-picture is received and displayed on the
monitor.
- Time-Out
Enter this menu to adjust, how long the camera display shall be displayed after pressing the
WAKE-UP-button.
Possible selections are: 30sec. , 45sec. , 60sec.
- SplitScreen
If two cameras are connected, you may enter this menu, to adjust whether a splitscreen
view of the cameras ‘pictures is divided vertically or horizontally.
Information:
Select this menu item to show the firmware version of the unit.
Parking Guideline:
This camera system has the option to show distance-guidelines
on the display. This helps you to visually see the distance
between the objects behind your car. Press the WAKE-UP-Button
for 5 seconds to switch this option on or off.