36
Step 3
Parts:
Mounting:
Loosen and remove the little screws intended for the mounting of the number
plate holder from the light holder rail and fasten the number plate holder to the
rail. The number plate holder has to be level with the lighting.
With the cable ties supplied with the carrier, the light cable can be fastened
neatly at the bottom of the carrier. Make sure the cable will not interfere with the
tilting mechanism.
Slide the nine short, black straps through the little slots
in the wheel holder, starting inside-out, going around
the wheel holder and then outside-in (see picture).
Finally clip the three plastic covers over the middle of
the three wheel holders.
End result:
Содержание AMBER III
Страница 2: ...2 ...
