25
Voltage Calibration
The Voltage Calibration will help users measure the AC voltage between phases with a multimeter.
How To Calibrate Voltage:
1. Navigate to the voltage calibration screen by pressing the Voltage button (Figure 20).
2. Select the Enter Measured Voltage Button to enter a test pressure (Figure 21).
3. Enter the desired test pressure in bars and press the green button with the check mark on the bottom right-
hand side of the screen (Figure 22).
WARNING! These functions are for factory calibration only and should
not be used by anyone other than authorized Pro Spot personnel.
!
Set the multimeter to AC to
get accurate readings.
Figure 20.
Figure 21.
Figure 22.
