Pro-Sl LED-PAR 631 INT ACCU, Руководство пользователя

Страница: 7 / 7

3) Communication with a emitter, but no DMX data: the indicator will lighting for 900ms, and then put out
for 100ms, will flicker slowly;
4) When wireless DMX communication is normal: the indicator light will always on
The device cannot receive DMX wireless signal and DMX cable signal at the same time.
When the device working in built-in programs mode, auto running mode, sound-active mode, static color
mode, please ensure that the matching 2.4GHz DMX wireless signal
transmitter doesn’t work, or can’t
send DMX signal.
When the device working in DMX mode or SLAVE mode can only receive Wireless DMX signal, and also
can output the DMX signal by DMX cable.
4. Disconnect and connect with Wireless DMX signal transmitter
The device can actively disconnect with wireless DMX signal transmitters:
1) press the “Unlink” button more than 3s, and then release it, the device will disconnect with wireless
DMX signal transmitter, the indicator light turn off; the device can only rebuild communication in
disconnect matching condition.
2) The device matching with wireless DMX signal transmitter;
The device cannot match signal transmitter actively, need operating the transmitter, build a matching
relationship. (About the operation of Wireless DMX signal transmitter, please refer to other user manual).
NOTE:
1) If no buttons operation within 20s, the LCD display will darken (no display); when in darken state,
press down any button, will display the current state; in display state, adjust the working mode and
operation state.
2) Pressing the Unlink button for 3s will disconnect from the current wireless DMX links, and can make a
new link after disconnected.
3) Press
“MODE” “SETUP” and charge at the same time, the fixture recovers to the factory settings.
4) Press
“MODE” only and charge at the same time, LCD display shows the temperature of the LED
board; if it is abnormal,
it will show “Tr1: Er”
5) Once charge it will check-up automatically. If the temperature control is abnormal the fixture will light
up Red, or no light if it is normal.
6) Battery capacity instruction:

Lithium battery full charged, the 100% indicator light will on; at this time low current will be charged.

The fixture full charged, the red charging indicator light will off, please disconnect the power then.

The 25% indicator light or charging indicator light flickers, indicating it is low power and please
charge in time.