PRO SIGNAL PSG3081, Инструкция по эксплуатации

Страница: 3 / 4

3
• Plug the IR-TX extender into the IR-IN port of the transmitter. Direct the extender
head towards the remote control sensor on the source device.
• Connect an HDTV to the receiver output port using a quality HDMI cable.
• Plug the IR-RX extender into the IR-IN port of the receiver. Direct the sender head
such that it can receive signals from the remote control for your source device.
• Connect one PSU to the receiver 12V DC socket and connect to the mains supply.
• Connect the second PSU to the transmitter 12V DC socket and connect to the mains
supply.
• Power on the signal source and the display.
LED Status
1. Power on indicator.
2. TX/RX connection established.
3. Indicates signal is being transmitted.
1. HDMI IN: HDMI signal input to connect with HDMI source device.
2. IR IN: IR signal input to connect with IR receiver extension cable.
3. IR OUT: IR signal output to connect with IR sender extension cable.
4. DC12V: Power input.
5. HDBT OUT: HDBaseT signal output.
1. DC12V: Power input.
2. HDBT IN: HDBaseT signal input.
3. HDMI OUT: HDMI signal output to connect with HDMI display device.
4. IR IN: IR signal input to connect with IR receiver extension cable.
5. IR OUT: IR signal output to connect with IR sender extension cable.
Transmitter Panel Connections
Receiver Panel Connections