OPERATION
Transmitter
Receiver
Transmitter LED indicator:
•
Blue LED : power on/off
•
RJ45 LED (Link cable connector) Green: VGA signal
Receiver LED indicator:
•
Blue LED: power on/off
•
RJ45 LED (Link cable connector) Green: VGA signal
•
Before installation, please make sure all devices you wish to connect have been
powered off.
•
Connect the VGA video and R/L audio from computer to the transmitter using suitable
cables.
•
Connect the transmitter link output to the receiver link input using suitable CAT5
cable.
NOTE: this is not an Ethernet device - do not connect via an Ethernet.
•
Connect the receiver output to a suitable VGA monitor.
•
Connect the Insert the 12V DC connector from the power supply into this product and
then connect the power supply into the wall mains outlet.
•
Power on the computer and monitor.
•
During operation the LEDs will illuminate as described below.
