13
CUTTING HEIGHT ADJUSTMENT
The cutting height of this 16" (40 cm) reel mower can be adjusted from 51/64” to
1-3/4” (2 to 4.5cm) by moving the height adjustment levers to the desired location.
NOTE:
The two height adjustment levers MUST be set at the same height
position.
Release the adjustable nut for roller, then adjust the cutting height with the
fixed rivet.
1.
ENGLISH
ADJUSTMENT
!
NOTE:
Adjusting the nuts while making blade adjustments is a very sensitive
procedure. A turn of 1/16” (1.5 mm) is considered a major adjustment. Before
tightening one adjustment nut, make sure to adjust the opposite nut by an equal
amount.
WARNING:
Do not over-tighten adjustment nuts, as this could damage cutting
bar.
!
!
MAINTENANCE
Minimum care is required to ensure smooth operation of your mower.
To avoid damage to mower or cutting blades, keep area to be mowed free
from debris.
For best results, regularly apply lubricant to mower’s cutting surfaces,
cutting reel axle shaft and wheels.
WARNING:
Carefully clean any debris from the cutting bar or reel blade.
NOTE:
/XEULFDWHWKHD[OHZLWKDOLJKW¿OPRIZKHHOEHDULQJJUHDVHLIQHHGHG
WARNING!
Repairs should be made by an authorized repair centre. Opening
this tool could invalidate your warranty.
1.
2.
3.
¿J
