8886434
Pistol-Grip Grease Gun
V1.0
6
For technical questions call 1-800-665-8685
5. Screw the grease gun head onto the barrel.
6. Prime the grease gun by following the steps in the section
Priming
the Grease Gun
below.
7. Connect the grease gun hose and coupler onto the grease gun
outlet using a thread sealant to make a seal-proof connection. DO
NOT over tighten as this may fracture the outlet.
BULK LOADING
1. Unscrew the grease gun head (B) from the barrel counter-
clockwise.
2. Pull back the plunger rod handle (J) all the way.
3. Scoop out clean grease from the bulk grease container into the
empty barrel (I).
4. Once the barrel is full, shake it to allow the grease to settle. If
additional space is created in the barrel, add more grease to fill it
completely.
5. Screw the grease gun head onto the barrel stopping 2-3 turns
before the head is fully tight.
6. Prime the grease gun by following the steps in the section Priming
the Grease Gun below.
7. Connect the grease gun pipe and coupler onto the grease gun
outlet using a thread sealant to make a seal-proof connection. DO
NOT over tighten as this may fracture the outlet.
SUCTION LOADING
1. Unscrew the grease gun head (B) from the barrel counter-clockwise.
2. Insert the open end of the barrel about 2 in. (50 mm) deep into the
grease bucket.
3. Slowly pull back the plunger rod handle (J) to draw grease into the
empty barrel (I).
4. Once the barrel is full, shake it to allow the grease to settle. If additional
space is created in the barrel, add more grease to fill it completely.
5. Screw the grease gun head onto the barrel.
6. Prime the grease gun by following the steps in the section
Priming
the Grease Gun
below.