![background image](http://html.mh-extra.com/html/pro-point/8819443/8819443_user-manual_1607319006.webp)
8819443
HEADACHE RACK
V1.0
6
For technical questions call 1-800-665-8685
6. Extend the right side bracket out beyond the truck wall.
7. Slide an M12 lock washer (#5) and an M12 flat washer (#6)
over an M12x75 flat head hex bolt and drop it into the front
slot of the side bracket.
8. Screw a U-clamp (#8) onto the bolt. Make sure the clamps
flanges are facing up.
9. Lift the rack slightly and push the side bracket in until the
U-Clamp is above the truck’s stake pocket hole. Align the
U-clamp with the hole and lower the rack until it is seated.
10. Reach under the truck bed’s rim and turn the U-clamp 90°.
Hold the clamp in this position while you tighten the bolt.
Do not tighten fully yet.
11. Repeat steps 5 to 9 with the left bracket.
12. Centre the rack between the brackets, then tighten the rack
and clamp bolts with a wrench.
13. Use the second bracket bolt hole as a guide and drill a new
bolt hole with a 1/2 in. a cobalt twist bit. Repeat with the
other bracket.
14. Slide an M12 lock washer (#5) and an M12 flat washer (#6)
over an M12x75 flat hex bolt (#4). Drop this bolt through
the new bolt hole created in step 13.
15. Position the flat bracket (#7) over the protruding bolt
beneath the rim. Hold the bracket in place while screwing
the bolt into it. Tighten with a wrench. Repeat with the
other bracket.
16. Repeat steps 14 and 15 with the other side.
17. Recheck the tightness of all bolts to ensure the rack is
properly installed.
Содержание 8819443
Страница 9: ...V1 0 HEADACHE RACK 8819443 Visit www princessauto com for more information 9 ...
Страница 10: ...8819443 HEADACHE RACK V1 0 10 For technical questions call 1 800 665 8685 ...
Страница 20: ...8819443 SUPPORT DE SÉCURITÉ V 1 0 10 En cas de questions techniques appelez le 1 800 665 8685 ...