8663833
24 X 36 IN. WELDING TABLE
V1.0
6
For technical questions call 1-800-665-8685
13. Insert an anchor bolt (#12) through the end of each leg and
secure with a nut (#8).
14. Tighten all nuts with a wrench, then flip the table upright
for use.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is
efficient, easier to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace
damaged or worn components. Only use identical
replacement parts when servicing.
WARNING! Only qualified service personnel should repair the
tool. An improperly repaired tool may present a hazard to the
user and/or others.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does
not function properly or parts are missing. If unable to do so,
have a qualified technician service the tool.
