8306052 1/2 IN. DR MAINTENANCE FREE AIR IMPACT WRENCH
V1.0
8
For technical questions call 1-800-665-8685
UNPACKING
WARNING! Do not operate the tool if any part is missing.
Replace the missing part before operating. Failure to do so
could result in a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect
for damage. Make sure that all items in the contents are included.
Contents:
• Air Impact Wrench
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included
Parts List.
INSTALL AIR CONNECTOR
Prepare a standard 1/4 in. NPT male air connector (sold
separately) for use with your tool.
1. Wrap the external threads of the male connector with
sealant tape.
1.1 Wrap tape in a clockwise direction so it will not unravel.
1.2 Do not tape all the threads. Leave several leading
threads unwrapped for easier alignment.
2. Screw the connector into the tool's air inlet (#8) and
tighten with a wrench until snug.
3. Run the compressor at a low volume and check the
connection for air leaks. Do not use the tool until all air
leaks are repaired or the faulty component is replaced.
IMPORTANT! Vibration may cause failure if a quick coupler is
connected directly to the air tool. To overcome this, connect a
leader hose to the tool. A quick coupler may then be used to
connect the leader hose to the air line hose.
