36
IP
Address:
Fill
in
the
IP
address
of
LAN
interfaces
of
this
WLAN
Access
Point.
Subnet
Mask:
Fill
in
the
subnet
mask
of
LAN
interfaces
of
this
WLAN
Access
Point.
Default
Gateway:
Fill
in
the
default
gateway
for
LAN
interfaces
out
going
data
packets.
DHCP:
Click
to
select
Disabled
,
Client
or
Server
in
different
operation
mode
of
wireless
Access
Point.
DHCP
Client
Range:
Fill
in
the
start
IP
address
and
end
IP
address
to
allocate
a
range
of
IP
addresses;
client
with
DHCP
function
set
will
be
assigned
an
IP
address
from
the
range.
Show
Client:
Click
to
open
the
Active
DHCP
Client
Table
window
that
shows
the
active
clients
with
their
assigned
IP
address,
MAC
address
and
time
expired
information.
[Server
mode
only]
Static
DHCP:
Select
enable
or
disable
the
Static
DHCP
function
from
pull
down
menu.
[Server
mode
only]
Set
Static
DHCP:
Manual
setup
Static
DHCP
IP
address
for
specific
MAC
address.
[Server
mode
only]
Domain
Name:
Assign
Domain
Name
and
dispatch
to
DHCP
clients.
It
is
optional
field.
802.1d
Spanning
Tree:
Select
enable
or
disable
the
IEEE
802.1d
Spanning
Tree
function
from
pull
down
menu.
Clone
MAC
Address:
Fill
in
the
MAC
address
that
is
the
MAC
address
to
be
cloned.
