pro master FL190, Руководство пользователя

Страница: 33 / 40

31
TROUBLESHOOTING
The flash does not fire.
1. The batteries are installed in the wrong orientation. Install the batteries in the
correct orientation.
2. The flash’s batteries are exhausted: If the flash recycling time takes 30 seconds or
longer, replace the batteries.
3. The flash is not attached securely to the camera. Attach the flash’s mounting foot
securely to the camera.
4. The electrical contacts of the flash and camera are dirty. Clean the contacts.
The slave unit does not fire.
1. The slave's wireless mode is not set to <SLAVE>. Set it to <SLAVE>.
2. The slave unit(s) is not positioned properly. Place the slave unit within the master
unit's transmission range. Point the slave unit’s sensor toward the master unit.
The power turns off by itself.
1. Auto power off (sleep) is in effect. Press the shutter button halfway or press the
test fire button.