HAT60241 / HAT60251 / HAT60261
PNEUMATIC HEIGHT ADJUSTABLE TABLE
ASSEMBLY INSTRUCTIONS
HAT60241 / HAT60251 / HAT60261
PNEUMATIC HEIGHT ADJUSTABLE TABLE
ASSEMBLY INSTRUCTIONS
PART QTY
1. Table Top . . . . . . . . . . . . . . . . . . . . . . . . . . .1
2. Leg Post. . . . . . . . . . . . . . . . . . . . . . . . . . . .2
3. Foot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
4. Top Support . . . . . . . . . . . . . . . . . . . . . . . . 2
5. Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
6. Caster . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
7. Short Screw . . . . . . . . . . . . . . . . . . . . . . . .18
8. Medium Bolt . . . . . . . . . . . . . . . . . . . . . . . .16
9. Long Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . .8
10. Height Adjustment Lever . . . . . . . . . . . . . .1
11. Allen Wrench (not shown) . . . . . . . . . . . . .1
12. Key Wrench (not shown) . . . . . . . . . . . . . .1
STEP 1
Remove all the parts from carton, separate them into part numbers indicated on the list and make sure part quantities are correct.
STEP 1
Remove plastic caps from ends of Channel (5). Attach Channel (5) between Leg Posts (2). To align rod with Leg Posts (2), squeeze lever to turn rod
into position.
SEE DETAIL A. Secure Leg Posts (2) to Channel (5) using six Medium Bolts (8) for each Leg Post (2). DO NOT FULLY TIGHTEN BOLTS.
STEP 2
Attach Top Supports (4) to Leg Posts (2) using two Medium Bolts (8) for each Leg Post (2).
FULLY ALL BOLTS USING ALLEN WRENCH (11).
STEP 3
Attach Leg Post (2) assembly to Table Top (1) using fourteen Short Screws (7).
FULLY TIGHTEN SHORT SCREWS (7). Attach Height
Adjustment Lever (10) to Table Top (1) using four Medium Screws (7).
FULLY TIGHTEN SHORT SCREWS (7).
STEP 4
Attach Feet (3) to Leg Posts (2) using four Long Bolts (9) for each Foot (3).
FULLY TIGHTEN LONG BOLTS (9). Screw in two Casters (6) into each
Foot (3).
FULLY TIGHTEN CASTERS (6) USING KEY WRENCH (12).
ATTENTION: MAKE SURE ALL BOLTS, SCREWS & CASTERS ARE FULLY TIGHTENED BEFORE USING TABLE.
STEP 4
© Office Star Products April 2016
plastic cap
STEP 2
STEP 3
plastic cap
DETAIL A
7
8
9
2
3
5
2
8
2
2
5
2
2
10
1
7
7
7
3
2
2
9
6
6
6
6
Phillips screwdriver also needed for
assembly (not provided)
4
4
5
