Pro-Line Boats Pro-mt Скачать руководство пользователя страница 2

This assembly manual contains instructions for 
building your new PRO-MT. Please take your time 
building the kit according to the instructions and 
become familiar with the steps.

Pro-Line is continually improving our products; 
consequently, actual parts included in the PRO-MT 
kit may appear slightly different than the images that 
appear in this manual.

WARNING! 

This is NOT a toy and is NOT suitable for children  
under 14 years of age. This kit contains many small parts which 
are potential choking hazards. Keep all components out of reach of 
small children.

HEALTH WARNING! 

This product contains chemicals known to the State of California 
to cause cancer, birth defects, or other reproductive harm. This kit 
is a high performance radio controlled model kit and can cause 
harm or personal injury. All liquids contained in this kit are not to be 
swallowed. Never touch rotating parts as this can cause injury.

TOOLS REQUIRED

1.5mm HEX

2.0mm HEX

2.5mm HEX

5mm NUT DRIVER 5.5mm NUT DRIVER 7mm NUT DRIVER

BODY REAMER

SIDE-CUT PLIERS

BODY SCISSORS

EQUIPMENT REQUIRED

RADIO

RECEIVER

ESC

MOTOR

PINION GEAR

SERVO & HORN

+

-

BATTERY

+-

CHARGER

PAINT

Thank you for purchasing Pro-Line’s PRO-MT! For over 
30 years, Pro-Line has designed and manufactured the 
best RC accessories in the world. Pro-Line has taken 

the best performance parts and combined them into 
one complete kit. Congratulations on making the right 
decision and joining Team Pro-Line in making history!

INCLUDED PERfORMANCE PARTS

Enjoy your Ride!
From your friends at Pro-Line

•  Pro-Line Performance HD Transmission
•  PRO-MT Aluminum Chassis
•  PowerStroke Shocks
•  ProTrac Suspension Kit
•  Performance Steering Kit
•  PRO-MT Sentinel Body

•  Secure-Loc Body Mount System
•  Trencher 2.8" All-Terrain Pre-Mounted Tires 
•  F-11 2.8" ProTrac Offset Black Wheels
•  Military-grade Components
•  Pro-Spline Axles

HELP AND INfORMATION

Installation manuals and videos can be 
found on our website at  

prolineracing.com/pro-mt/build 

For any help you may need, you can call our 
tech support line at 

1-800-899-RACE(7223).

REGISTRATION

Register your PRO-MT kit online at  

prolineracing.com/pro-mt/register  

or call 1-800-899-RACE(7223).

SCAN fOR HELP

SCAN TO REGISTER

Содержание Pro-mt





















Отзывы: