Circuit Breakers – On the switch panel below the individual switches
1 2 3 4 5 6 7 8
1 Horn - The horn is used to signal, warn, or alert other boats, swimmers or people on shore. Depress
the horn switch to the up or forward position to activate the horn. Release the horn switch to
deactivate the horn. Using different sequences of horn blasts indicates different and sometimes
dangerous situations to you or someone around you.
Avoid any horn use without an appropriate purpose. See the Safety Section in this manual and/or
take a safe boating course for more information on the proper use of the horn.
2 Navigation & Anchor Lights - Locate the Nav. light switch on the instrument panel. This is a 3-way
switch (forward, middle, back/aft) that functions as follows when you press the switch:
•
Forward position - Turns on the bow lights and the anchor light. This position will
also activate the red light in your compass.
o
If you have Faria gauges on the dash panel, this function will
illuminate the gauge lights.
o
If the gauges were provided by the engine manufacturer (i.e.,
Mercury, Honda, etc.), this switch will not illuminate the gauge
lights. Instead, your gauge lights will be illuminated when the
ignition switch is turned on.
•
Middle position – All lights are off.
•
Back/Aft position – Anchor light is on; the bow lights and gauge lights are off.
3 Bilge Pump - Your boat is equipped with an automatic bilge pump and float switch. This 1100 gph
pump is located in the bilge and is mounted as far aft as possible. The bilge pump and float switch
are accessible via the hatch that is installed in the center of the motor well.
The bilge pump is wired automatic to the battery and has a manual override located at the switch
panel on the console. The automatic float switch is wired directly to the
Starboard
battery terminals
through breakers or inline fuses. The circuit breaker is located at the helm next to the manual
switch. Depressing the bilge pump switch to the up or forward position activates the bilge pump.
4 Fresh Water (Optional) – The fresh water switch provides power to the fresh water pump. Depress
the fresh water switch to the forward position to activate the fresh water pump. The fresh water
faucet/nozzle is installed behind a white cap located just outside the transom door. Press the
button/lever on the handle to activate the faucet/nozzle. If the fresh water system is not going to be
in use, stow away the hose and move the switch to the aft or down position to turn the pump off.
16
