Operation and Performance
Trim / Tilt
The power trim system allows the operator to raise and lower the motor(s) throughout an infinite number of
settings between its upper and lower limits. There is a trim setting that will yield maximum speed, stability or
maneuverability for every throttle setting. Refer to your engine manual for specific questions regarding the trim
and tilt.
For most conditions, the best all-round performance is obtained when the bow of the boat is slightly out of the
water and all motors are trimmed to the same degree.
General trim down (or "in") characteristics are:
•
Starting position for best acceleration to plane.
•
Lowers the bow, which provides better stability and ride in rough water.
•
Reduces boat speed and economy due to increased drag of hull and drive.
•
More spray over bow.
General trim up (or "out") characteristics are:
•
Raises the bow of the boat out of the water resulting in less hull in the water.
•
Greater speed and economy for a given throttle setting.
•
Greater maneuverability; provided prop does
not ventilate during the maneuver.
•
In excess, the reduced stability can lead to bouncing, porpoising, and propeller ventilation.
In addition to providing ideal boat performance, the power-trim/tilt enables the motors to be raised (tilted up) for
trailering, beaching and launching. Avoid operating the trim switch if travel of the motor is blocked or it has
reached the limits of travel.
Propellers
25
If your Pro-Line was ordered with a factory installed engine, it will have a propeller that has been performance
tested to provide the best all-round performance for your engine/hull combination at sea level. In some situations,
it may be desirable to re-prop your Pro-Line to enhance the desired performance needs for your area. For
instance:
Содержание 2008 20 Sport
Страница 2: ...ii...
