OPERATION
Follow the instruction for removal and installation of transmission, transfer case or transaxle according to the vehicle
manufacturer's service manual.
Raise saddle assembly:
1. Close release valve by turning the release valve level clockwise until firm. Pump handle until saddle reaches
desired height.
2. Secure the load using the provided chains.
Ensure center gravity of load is centered on the saddle and load is stable before moving jack. An off-center
transmission could cause the jack to tip or flip over .
Lower saddle assembly:
Be sure all tools and personnel are clear before lowering load.
Slowly engage release valve!
Maintain control
of the rate of speed at which the load lowers at all times!
Open release valve by turning lever counter-clockwise, but never more than 2 full turns. Control the rate of descent
at all times. The more you open the release valve, the faster the load descends.
Never
use this jack as a work station!
!
!
4
!
•
Read, understand, and follow
all printed material provided with and on this product
before use
.
•
Do not
exceed rated capacity.
• Use
only
on hard, level surfaces capable of supporting the load.
•
Adequately support the vehicle before starting repairs.
• If loaded jack must be moved, make certain that load is secured by appropriate means, is stable, is in
the
lowest possible position
, is moved over a smooth, hard level surface and that the l
ifting platform
is level
.
• Use of this product is
limited to removal, installation, and transportatio
n of
automotive and light
truck transmissions, transfer cases and transaxles
.
• Use only adapters / accessories provided by the manufacturer of this transmission jack.
• Use only adapters / accessories whose
rated capacity is greater
than the rated capacity of this jack.
• Ensure the center of gravity is
center loaded
on the saddle.
• Never use this device as a work/repair station.
Transfer
the
load immediately
to a suitable work station.
• No alteration shall be made to this product.
•
Failure to heed
these markings may
result
in
personal injury and/or property damage
.
To avoid
crushing and related injuries
:
•
Never
work on, under or around a load supported only by hydraulic jack.
•
Be alert
and
sober
when using this product. Do not operate under the
influence of drugs or alcohol.
WARNING
!
WARNING
!