background image

2

    SAVE THESE INSTRUCTIONS    

For your safety please read, understand and follow the information contained within before use. The owner and operator 

shall have an understanding of this product and safe operating procedures before attempting to use. Instructions and 

safety information shall be conveyed in the operators native language before use is authorized. Make certain that 

the operator thoroughly understands the inherent dangers associated with the use and misuse of the product. If any 

doubt exists as to the safe and proper use of this device as outlined in this factory authorized manual, remove the lift 

from service until safe and proper use is clearly understood.

    INTENDED USE    

This lift is specifically designed to lift and support up to rated capacity loads consisting of a single Motorcycle, ATV, 

Snowmobile, Water Craft or Riding Lawn Mower whose frames are compatible with the lifting members of the lift.
Incompatibility is evident when the loaded motorcycle, ATV, etc wobbles, feels unstable, and/or does not securely on 

the lift’s padded lift arms. Tying down incompatible loads will not make the loads secure and may cause unexpected 

loss of load resulting in personal injury and/or property damage. These lifts are NOT suitable for lifting, leveling and/or 

positioning cars, trucks, SUV’s or conveyances other than those specifically listed and approved above. These lifts 

are NOT suitable for lifting, leveling and/or positioning houses, construc-tion trailers and dwellings in general. This 

product does not contain independent lifting devices, but is designed to be permanently assembled. Hydraulic unit 

is not to be used independently of the motorcycle lift.

    WARNING    

Study, understand and follow all printed materials provided with and on this device. Do not exceed rated capacity. 

Ensure load is compatible with lift’s lifting pad. Center load on lift pads. After lifting load to desired height, ensure 

lift arm locking mechanism is engaged. Secure load to lift using apropriate straps. Engage Anti-slide Stops before 

working on or around loaded Lift. Move loaded lift only over smooth, level, seam-less surfaces. Before moving, ensure 

load has been lowered completely. Use only on hard, level surfaces capable of sustaining rated capacity loads. Lift 

only on areas of the load as specified by it’s manufacturer. Do not alter this product in any way. Do not use for any 

purpose other than that for which this device is intended. Failure to heed these messages may result in personal 

injury and/or property damage.

SPECIFICATIONS:

Rated Capacity: 680 kg

Height Lowered: 118 mm

Height Raised: 368 mm

Net Weight: 26.8 kg

Содержание T-2300A








Отзывы: