5
REPLACEMENT PARTS
Not all components of the lift are replacement items, but are illustrated as a convenient
reference of location and position in the assembly sequence. When ordering parts, give
model number, part number and description below. Call or write for current pricing: phone
(816) 891-6390, fax (816) 891-6599 or contact Pro-Lift Customer Support. 10939 N.
Pomona Ave., Kansas City, MO 64153.
Model T-2151
Part No.
Description
Quantity
1
Front Wheel Assembly
2
2
Rear Caster Assembly
2
3
Hydraulic Unit Assembly
1
4
Locking Lever Assembly
1
5
Handle
1
--
Complete Hardware Kit (not shown)
1
--
Labels
2
--
Owner’s Manual
1
1
5
2
3
4
Figure 1 - Utility Lift Nomenclature
4
MAINTENANCE
When lift is not in use, lifting arm should be
stored in the fully retracted position. Keep
lift clean and well lubricated. Apply a couple
of drops of light machine to all pivoting joints
as needed. Thoroughly wipe up excess oil
to help prevent slipping and falling.
Adding oil
1. To check hydraulic oil level, remove unit
from lift, stand unit upright on a stable,
level surface. Remove oil filler plug.
Oil should be to the level of the oil filler
plug hole.
2. If low, add high quality hydraulic jack oil
ONLY. Never use ANY other fluid. Use of
other fluid may result in hydraulic system
failure, causing sudden and unexpected
loss of load height.
3. Install oil filler plug, install hydraulic unit
into receiver of lift. Secure with provided
bolt.
Changing oil
To get the longest life possible out of your
lift, we recommend changing the hydraulic
oil after 7 years of use, sooner if used in
a dust and grit filled environment. Do not
expose to moisture. Dry lift completely if it
gets wet. Check pump piston and ram of
hydraulic unit periodically for signs of rust
and corrosion. Clean mildly affected areas
with a clean oily cloth. Never use abrasives
on the pump piston and ram surfaces.
1. Remove hydraulic unit from lift. Stand
unit upright on a stable, level surface.
Remove oil filler plug and drain old oil
into a suitable container.
Notice:
Dispose of used hydraulic fluid
in accordance with local environmental
regulations.
2. Fill with high quality hydraulic jack oil.
Handle
Lift Saddle
Height Locking/
Unlocking Lever
Casters
Hydraulic
Unit
Press Height Locking Lever Forward
Against Hydraulic Unit to Engage
Locking Mechanism. Pull Lever Back
Over Lift Pedal To Disengage Lock
-
ing Mechanism
Release Pedal
Hydraulic Unit
Lift Pedal
Sleeve
Oil Filler
Plug
