Pro-Ject Audio Systems USB Box, Инструкция по эксплуатации

Страница: 3 / 7

© Audio Trade GmbH · Pro-Ject USB Box · Revision 15.10.10/15.12.10
3
Connecting to a Computer (Windows XP ® operating system)
1 . Connect the USB-input of the USB Box to a free USB-socket on your computer and
turn it on/make sure it is powered on.
Please note: Connection should be made to an USB-socket of your computer directly. Connecting to
USB-hubs or switches can cause problems.
2 . The “new hardware found assistant“ will detect the unit and announces it as a “ USB loudspeaker ”.
3 . open the System menu via “Start“ (Windows key)
Settings
Control Panel
Sound and Audio Devices
4 . In the control panel open the
“Sound and audio“ menu.
5 . In the Sounds and Audio panel select the Audio
tab. In the Replay section select your sound card
from the pull-down lists (usually preselected).
6 . Select the USB Audio CODEC from the pull
down list in the Playback section. Make sure
your sound card is selected for Recording.
7 . Confirm your selections by clicking the OK button and close the control panel windows.