© Audio Trade GmbH · Pro-Ject RPM 9.1 SuperPack 1& 2 / Ort RR_Sum BP2 · Revision 1.3.08/1.5.08
7
Fitting and connecting the cartridge
** All cartridges with half inch mounting holes can be fitted. Leaving the needle's protection cover on, fit the
cartridge to the headshell using the screws supplied with the cartridge by passing one screw through each
slot in the headshell (21). Do not tighten the nuts yet.
Connect the tonearm wires to the cartridge pins as follows:
white
left channel positive (L+)
red
right channel pos. (R+)
green
right channel return (R -)
blue
left channel return (L -)
The full sound quality of the record player can only be achieved if the cartridge is correctly adjusted. Particular
tools like the PRO-JECT alignment tool are required to accomplish this job properly. If you are not well acquainted
with the adjustment of cartridges you are advised to call upon the willing help of your PRO-JECT dealer to
accomplish this task for you.
Please note: adjusting a cartridge and tonearm calls for the greatest care in order to avoid damaging
the cartridge or tonearm bearings. Leave this work to your dealer if you are in any way unsure of the
necessary steps and precautions to be taken.
Technical specifications PRO-JECT RPM 9.1
Nominal speeds
33,33/45,11 r.p.m.
Speed variance
±0,5 %
Wow and flutter
±0,06 %
Signal to noise
-73dB
Downforce range
10-30mN
Effective tonearm length 9 " (230mm)
Overhang 18mm
Power consumption
2W
Outboard power supply 16V/500mA AC, suitable for your country's mains supply
Dimensions (W x H x D) 440 x 180 x 325mm
Weight 12,5kg
Technical specifications Pro-Ject Speed Box SE
Nominal speeds:
* 33,33 and 45,11 r.p.m..
Pitch control:
±20 steps/0,1 r.p.m.
Quartz oscillator:
Speed sta/- 0,001%
Turntable connection:
16V/AC 190mA max. (3W power consumption max.)
120V model only:
120V/AC 25mA max. (3W power consumption max.)
230V model only:
230V/AC 13mA max. (3W power consumption max.)
Power supply type:
Mains-fed outboard power supply, suitable for your country's mains supply
Output voltage:
16V/1.000mA AC
Dimension W x H x D:
130 x 79 x 173mm
Weight:
1.250g without power supply