© Audio Trade GmbH · Pro-Ject Head Box DS · Revision 2013.1.15
3
Mains power connection
Connect the low voltage plug from the power supply to the
Power 18V
"
socket before connecting the
power supply to the mains.
Front panel controls
+
-
Head Box DS
!
Please set the volume level to minimum before connecting the headphone.
Minimum impedance of the head phone 30ohms.
To switch on from standby or to standby
will toggle the unit between its fully operational status and standby. After switching on, the USB input will be
selected automatically.
Input selector
Pressing (short) repeatedly selects the digital inputs (USB, OPTICAL and SPDIF) in turns. The selected input
and the sampling frequency of the input signal will be shown in the display.
A long press on activates and deactivates the analogue input (
In
). To use the analogue input, the USB input
has to be activated also. The display shows: INPUT USB and ANALOG IN.
Connecting a headphone
Connect the headphones to the ¼“ (6,3mm
) jack socket on the front of the headphone amplifier.
Volume
Adjust the volume (87 steps) to the desired level using the buttons and . The volume level will be shown in
the display. -87dB indicates min., 00dB max..
Headphone replay
Use the input selector of the amplifier or the headphone amplifier to choose the source you wish to hear.
Содержание Head Box DS
Страница 1: ...INSTRUCTIONS FOR USE Pro Ject Head Box DS ...