© Pro-Ject Audio Systems · Pro-Ject BT Box E (9V) · Revision 22.04.2021
3
BT pairing
Pairing with devices with Android OS
Open Settings and tap on BT. Turn on BT and tap on Scan. Searched devices will show up. Tap on "BT Box E"
(Confirm pairing code if requested). Once paired it will show "Connected to media Audio", now you can play
music from your Android device over BT to BT Box E.
Pairing with Apple devices
Tap on Settings, tap on BT, turn on BT, your device will automatically start searching for available devices. Tap
on "BT Box E" and it will be connected to the BT Box E. Now you can play music.
It´s possible to use BT Box E also with other than above mentioned devices, pairing procedure is always
similar.
Reconnecting
If you move out of range or turn off BT, BT Box E will disconnect from your device. To reconnect simply open
the BT manager and tap on "BT Box E". If the signal is lost for only a few seconds it can reconnect automatically
- typically if you move out of the range and then return back.
Adding a new phone or tablet
The unit can play music from one device at a time, but it is capable of being paired to up to 8 devices. If you
want to switch from one device to another, you have to disconnect existing connection to BT Box E and then
follow the steps for pairing with new device.
Troubleshooting
No music from speakers:
- make sure the BT Box E is powered
- make sure an audio cable or an optical cable is correctly connected to BT Box E
- make sure you are within the range
- make sure the BT is enabled and the device is connected to BT Box E. Volume level is properly set
Technical specifications Pro-Ject BT Box E
Effective range of wireless signal
up to 10m in case of direct visibility
Line-level output:
1 x RCA/Cinch
Output voltage:
2Vrms
Digital outputs:
1 x optical (TOSlink
®
)
BT version:
2.1 + EDR
Supported codecs:
aptX, SBC, A2DP BT profile
Frequency:
2402 ~ 2480 MHz
Sensitivity:
- 84dBm
Maximum TX power
+4dBm
Outboard power supply:
9V/300mA DC
Power consumption:
100mA/9V DC,<1W in standby
Dimensions W x H x D (D with sockets): 120 x 32 x 100 mm
Weight:
250g without power supply
Service
Содержание Box-Design Pro-Ject BT Box E
Страница 1: ...INSTRUCTIONS FOR USE Pro Ject BT Box E ...
