© Pro-Ject Audio Systems · Pro-Ject Bluetooth Box E (9V) · Revision 2014.07.31
4
Technical specifications Pro-Ject Bluetooth Box E
Effective range of wireless signal
up to 10m in case of direct visibility
Line-level output:
1 x RCA/Cinch
Output voltage:
2Vrms
Digital outputs:
1 x optical (TOSlink
®
)
Bluetooth version:
2.1 + EDR
Supported codecs:
aptX, SBC, A2DP Bluetooth profile
Outboard power supply:
9V/300mA DC
Power consumption:
100mA/9V DC,<1W in standby
Dimensions W x H x D (D with sockets): 120 x 32 x 100 mm
Weight:
250g without power supply
Service
Should you encounter a problem which you are not able to alleviate or identify despite the above information,
please contact your dealer for further advice. Only if the problem cannot be resolved there, the unit should
be sent to the responsible distributor in your country.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions
for use. Modification or changes to any part of the product by unauthorized persons release the
manufacturer from any liability over and above the lawful rights of the customer.
Copyright, trademarks
Pro-Ject Audio Systems is a Registered Trademark of
H. Lichtenegger.
This guide was produced by: Pro-Ject Audio Systems
Copyright
©
2014. All rights reserved.
The information was correct at the time of going to
press. The manufacturer reserves the right to make
changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing
process of technical development.
TOSlink
®
is a registered trademark of Toshiba Corporation.
