Pro-Ject Audio Systems Align it DS3 Скачать руководство пользователя страница 9

Страница: 9 / 9

Service

Should you encounter a problem you cannot alleviate or identify despite the above information, don't hesitate

to get in touch with your dealer for further advice. Only when the issue cannot be resolved there should the unit

be sent to the responsible distributor in your country. Guarantee repairs will only be affected if the unit is

returned correctly packaged. For this reason, we recommend keeping the original packaging.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions

for use and/or by transportation without the original packaging. Modification or change to any part of

the product by unauthorized persons releases the manufacturer from any liability over and above the

customer's lawful rights.

Pro-Ject Audio Systems is a Registered Trademark of

H. Lichtenegger.
This guide was produced by: Pro-Ject Audio Systems

The information was correct at the time of going to

press. The manufacturer reserves the right to make

changes to the technical specification without prior

notice as deemed necessary to uphold the ongoing

technical development process.

Содержание Align it DS3









