12
©
Pro-Ject Audio Systems
•
Pro-Ject Speaker Box 10DS2
•
Revision
1.0
Technical specifications Pro-Ject Speaker Box 10DS2
Enclosure type: bass r
eflex
via rear port
Recommended
amplifier
power: 15 to 150 watts RMS
Frequency response: 45Hz - 20kHz
Nominal impedance: 4 ohms
Sensitivity: 88dB (1w /1m)
Chassis: 1" silk dome tweeter
5" plycone bass/mid (2 pc.)
Dimensions W x H x D: 160 x 898 x 195 mm (excluding spike feet)
Weight: 12,8kg / piece
Potential incorrect use and fault conditions
No signal on one or both channels:
Make sure that
amplifier
is turned on and source is working properly.
No connection between speaker and
amplifier
. This could be due to a faulty plug, broken wire
or or simply loose plug/socket connection.
Service
Should you encounter a problem which you are not able to alleviate or identify despite the
above information, please contact your dealer for further advice. Only when the problem
cannot be resolved, the unit be sent to the responsible distributor in your country.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these
instructions for use. M
odification
or change to any part of the product by unauthorized persons
release the manufacturer from any liability over and above the lawful rights of the customer.
For more information about Pro-Ject and Box Design, see our homepage:
http://www.project-audio.com
