Pro-Form Whirlwind PRO, Руководство пользователя

Страница: 17 / 28

17
HOW TO USE THE MANUAL MODE
1. Turn on the console.
Press any button or begin pedaling to turn on the
console.
When you turn on the console, the displays will turn
on, a tone will sound, and the console will be ready
for use.
2. Select the manual mode.
When you turn on the con-
sole, the manual mode will
be selected automatically.
If you have selected a
workout, reselect the man-
ual mode by pressing the
Manual button.
3. Follow your progress with the displays.
The speed meter—This
display will provide a visual
representation of your pedal-
ing speed. As you increase
or decrease your pedaling
speed, bars will appear or
disappear in the speed meter.
Note: During a preset workout, this display will
show a target speed zone for each segment of the
workout.
The upper display—This
display will show your pedal-
ing speed in revolutions
per minute (RPM) and your
power output in watts. The
display will change every few
seconds.
This display will also show your heart rate (BPM)
when you use the handgrip heart rate monitor or a
compatible heart rate monitor (see step 5).
The center display—This
display will show the distance
(Dist.) you have pedaled in
miles or kilometers and the
elapsed time. The display will
change every few seconds.
Note: During a preset workout, the display will
show the time remaining in the workout instead of
the elapsed time.
The lower display—This
display will show your
pedaling speed in miles per
hour or kilometers per hour
and the approximate num-
ber of calories (Cals.) you
have burned. The display will change every few
seconds.
To select a specific type of workout information for
continuous display, press the Display Mode button
repeatedly until the desired workout information is
shown.
To return to alternating workout information in the
displays, press the Display Mode button repeatedly
until the word SCAN appears in the center display.
Change the volume level of
the console by pressing the
Vol increase and decrease
buttons.
To pause the console, press the Begin/End but-
ton or simply stop pedaling. When the console is
paused, the displays will pause. To continue your
workout, press the Begin/End button or simply
resume pedaling.
To reset the displays to zero, press the On/Reset
button.
Note: The console can show pedaling speed and
distance in either miles or kilometers. To change
the unit of measurement, see THE SETTINGS
MODE on page 21.