10
9
9. Identify the Left and Right Upper Body Arms
(22, 23), which are marked with “L” and “R”
stickers, and orient them as shown.
Attach each Upper Body Arm (22, 23) with three
M8 x 12mm Patch Screws (84).
Orient the two Handle Covers (48) as shown.
Slide the Handle Covers onto the Upper Body
Arms (22, 23) so that they cover the Patch
Screws (84). Note: The Handle Covers may
already be placed on the Upper Body Arms.
48
48
22
23
84
84
84
10. The Console (11) can be operated with four
1.5V D batteries (not included); alkaline batter-
ies are recommended.
IMPORTANT: If the
elliptical exerciser has been exposed to cold
temperatures, allow it to warm to room tem-
perature before inserting batteries into the
Console. If you do not do this, the console
displays or other electronic components
may become damaged.
Remove the battery
cover and insert four batteries into the Console.
Make sure that the batteries are oriented as
shown by the diagram inside the battery com-
partment. Then, reattach the battery cover.
To purchase an optional AC adapter, contact
the store where you purchased this product
or call the telephone number on the cover of
this manual. To avoid damaging the console,
use only a manufacturer-supplied AC
adapter.
Plug one end of the AC adapter into
the jack on the console; plug the other end into
an outlet installed in accordance with all local
codes and ordinances.
10
Battery
Cover
Batteries
11
