6
STEP 1
Attach the front stabilizer (18) to
the main frame (1) with the Allen
bolts (20), Spring washer (36)
and Arc washers (19), then fix
the rear stabilizer (24) to the main
frame (1) with the Allen bolts
(25), Spring washer (36) and Arc
washers (26) as shown.
STEP 2
I: Slip the Mast shield (13) onto the handlebar post
(11);
II: Connect the lower sensor wire (14) to the exten-
sion sensor wire (12).
III: Fix the handlebar post (11) on the main frame
(1), using the Allen bolts (7), spring washers (36),
and flat washers (41) as shown.
IV: Slip down the Mast shield (13) and fit in the
place.
STEP 3
Feed the pulse sensor wires (8) out of the handle-
bar post (11) through the computer bracket on the
top.
Attach the front handlebar cover on the handlebar
(5) and adjust the handlebar (5) to a proper posi-
tion, then tighten handlebar (5) to the handlebar
post (11) with the Bolt (39), spacer (40) and flat
washer (41) as shown.
