8
6
5
Avoid pinching
the wires
5.
Tip: Avoid pinching the wires.
Insert the
Upright (5) into the Frame (1).
Attach the Upright (5) with six M8 x 16mm
Screws (102) and six M8 Split Washers (83).
Do
not tighten the Screws yet.
Slide the Top Cover (23) downward.
Do not
press the Top Cover into the Right and Left
Frame Covers (21, 22) yet
.
5
1
23
21, 22
102
83
102
83
102
6. Identify the Right Upper Body Arm (8) and the
Right Upper Body Leg (6) and orient them as
shown.
Insert the Right Upper Body Arm (8) into the
Right Upper Body Leg (6).
Attach the Right Upper Body Arm (8) with three
M8 x 45mm Bolts (104) and three M8 Locknuts
(105).
Make sure that the Locknuts are inside
the hexagonal holes. Do not fully tighten the
Bolts yet.
Assemble the Left Upper Body Arm (9) and
the Left Upper Body Leg (7) in the same way.
Hexagonal
Holes
9
7
6
8
104
104
105
105
