manualshive.com logo in svg

Pro-Form PFEL04211.7, Руководство пользователя

Поделиться
Скачать
Pro-Form PFEL04211.7 Скачать руководство пользователя страница 23

23

HOW TO ADJUST THE DRIVE BELT

If you can feel the pedals slip while you are pedaling, 
even when the resistance is adjusted to the highest 
level, the drive belt may need to be adjusted. 

To adjust the drive belt, you must remove the shield 
cover and the left shield (see the instructions below). 

See EXPLODED DRAWING B on page 27. Using a 
flat screwdriver, release the tabs along the sides of the 
Shield Cover (37), and then lift the Shield Cover away 
from the frame.

Next, remove the M4 x 16mm Screws (83) and the M4 
x 12mm Self-tapping Screws (64) from the Left and 
Right Shields (44, 45). 

Make sure to note which size 

of Screw you remove from each hole.

 Then, gently 

move the Left Shield out of the way.

Loosen the Pivot Screw (88). Then, tighten the Drive 
Belt Adjustment Screw (72) until the Drive Belt (46) is 
tight. 

When the Drive Belt (46) is tight, tighten the Pivot 
Screw (88).

Then, reattach the left shield and the shield cover.

46

88

72

FCC INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference 
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning the equipment off 
and on, try to correct the interference by one or more of the following measures: 

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and the receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 
•  Consult the dealer or an experienced radio/TV technician for help. 

FCC CAUTION: To assure continued compliance, use only shielded interface cables when connecting to 
computer or peripheral devices. Changes or modifications not expressly approved by the party respon-
sible for compliance could void the user’s authority to operate this equipment.

Содержание PFEL04211.7





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды