14
14 .
Note: If it is assembled on a smooth surface,
the treadmill may roll forward during this
step.
Raise the Frame (56) to the upright position.
Have a second person hold the Frame until
step 16 is completed.
Orient the Latch Crossbar (98) as shown.
Make
sure that the “This side toward belt” sticker
(A) is facing the treadmill.
Attach the Latch
Crossbar to the brackets on the Frame (56) with
two 5/16" x 3/4" Screws (6).
56
98
A
6
6
Brackets
14
15. Orient the Storage Latch (99) so that the decals
are facing away from the treadmill as shown.
Attach the lower end of the Storage Latch (99) to
the bracket on the Base (94) with a 5/16" x 1 3/4"
Bolt (41), two Latch Spacers (100), and a 5/16"
Nut (63) as shown.
Raise the Storage Latch (99) to a vertical posi-
tion. Then, remove the tie from the top of the
Storage Latch.
94
99
41
Decals
63
100
Tie
15
