Pro-Form 910 ZLT Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 36

background image

26

TROUBLESHOOTING

Most treadmill problems can be solved by following
the simple steps below. Find the symptom that
applies, and follow the steps listed. If further assis-
tance is needed, see the front cover of this manual.

SYMPTOM: The power does not turn on

a. Make sure that the power cord is plugged into a

properly earthed outlet (see page 16). If an ex-
tension cord is needed, use only a 3-conductor, 14-
gauge (1 mm

2

) cord that is no longer than

5 ft. (1.5 m).

b. After the power cord has been plugged in, make

sure that the key is inserted into the console.

c. Check the power switch located on the treadmill

frame near the power cord. If the switch protrudes
as shown, the switch has tripped. To reset the
power switch, wait for



ve minutes and then press

the switch back in.

SYMPTOM: The power turns off during use

a. Check the power switch (see the drawing above).

If the switch has tripped, wait for



ve minutes and

then press the switch back in.

b. Make sure that the power cord is plugged in. If the

power cord is plugged in, unplug it, wait for



ve

minutes, and then plug it back in.

c. Remove the key from the console, and then

reinsert it.

d. If the treadmill still will not run, please see the front

cover of this manual.

SYMPTOM: The console displays remain lit when
you remove the key from the console

a. The console features a display demo mode, de-

signed to be used if the treadmill is displayed in a
store. If the displays remain lit when you remove

the key, the demo mode is turned on. To turn off
the demo mode, hold down the Stop button for a
few seconds. If the displays are still lit, see THE
INFORMATION MODE on page 24 to turn off
the demo mode.

SYMPTOM: The displays of the console do not
function properly

a. Remove the key from the console and

UNPLUG

THE POWER CORD.

Place the treadmill in

the storage position (see HOW TO FOLD THE
TREADMILL on page 25).

Next, remove the two indicated #8 x 3/4"
Screws (6).

Lower the treadmill (see HOW TO LOWER THE
TREADMILL FOR USE on page 25). Remove
the three #8 x 3/4" Screws (6). Carefully slide the
Motor Hood (57) off.

Reset

Tripped

c

6

6

a

57

6

6

«
...
24
25
26
27
28
...
»

Содержание 910 ZLT





































Отзывы:

Нет отзывов

Похожие инструкции для 910 ZLT

Бренд: Action Страницы: 34

1195 Zlt Cwl Treadmill

Бренд: ProForm Страницы: 32

Бренд: Garlando Страницы: 17

Бренд: PowerPeak Страницы: 92

Бренд: Life Gear Страницы: 23

Бренд: Life Gear Страницы: 20

Бренд: Body Break Страницы: 36

Бренд: Life Fitness Страницы: 60

Бренд: Weslo Страницы: 16

170-190/65 Series

Бренд: h/p/cosmos Страницы: 97

5600 R NTL18940

Бренд: NordicTrack Страницы: 34

Бренд: NordicTrack Страницы: 36

Бренд: Paradigm Страницы: 25

Бренд: NordicTrack Страницы: 4

Бренд: Livestrong Страницы: 20

Бренд: Livestrong Страницы: 26

Бренд: Hammer Страницы: 19

Бренд: ICON Health & Fitness Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды