Pro-Form 765 TR, Руководство пользователя

Страница: 14 / 32

14
To reset the displays, press the On/Reset button.
Measure your heart rate if desired.
You can measure your heart rate using the built-in
handgrip pulse sensor or the optional chest pulse
sensor. To use the handgrip pulse sensor, follow
the instructions below. Note: If you wear the
chest pulse sensor and hold the handgrip
pulse sensor at the same time, the console
may not display your heart rate accurately.
If there are thin
sheets of plas-
tic on the metal
contacts on the
handgrips, peel
off the plastic.
To use the
handgrip pulse
sensor, hold the
handgrips with
your palms rest-
ing against the
metal contacts. Avoid moving your hands.
When your pulse is detected, the heart-shaped
indicator in the large display will flash each time
your heart beats, and your heart rate will be
shown.
For the most accurate heart rate reading, continue
to hold the handgrips for about 30 seconds. Note:
When you first hold the handgrips, the large dis-
play will show your heart rate continuously for 30
seconds. The display will then show your heart
rate along with other feedback modes.
Turn on the fan if desired.
To turn on the
fan at low speed,
press the Fan
button. To turn
on the fan at
high speed,
press the Fan
button a second
time. To turn off
the fan, press the Fan button a third time. Note: If
the fan is turned on but the pedals are not moved
for thirty seconds, the fan will automatically turn
off.
Rotate the thumb wheel on the right side of the
fan to pivot the fan to the desired angle.
When you are finished exercising, the console
will automatically turn off.
If the pedals are not moved for a few seconds,
the displays will pause and the time will flash in
the large display. If the pedals are not moved and
the console buttons are not pressed for a few
minutes, the console will turn off to conserve the
batteries.
7
6
5
Thumb Wheel
Metal
Contacts