Pro-Form 7.0 Crosstrainer Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 36

Pro-Form 7.0 Crosstrainer Скачать руководство пользователя страница 22

22

HOW TO ADJUST THE CUSHIONING SYSTEM

Remove the key from the console and unplug the

power cord.

The treadmill features a cushioning sys-

tem that reduces the impact as you walk or run on the

treadmill. To increase the firmness of the walking plat-

form, step off the treadmill and slide the platform cush-

ion toward the front of the treadmill. To decrease the

firmness, slide the platform cushion toward the back of

the treadmill.

Note: Make sure that both cushions

are set at the same firmness level. The faster you

run on the treadmill, or the more you weigh, the

firmer the walking platform should be.

THE OPTIONAL CHEST PULSE SENSOR

An optional chest pulse sensor offers hands-free oper-

ation as it tracks your heart rate during your workouts.

To purchase the optional chest pulse sensor, call

the telephone number on the front cover of this

manual.

If you purchase the optional chest pulse sensor,

follow the steps below to install the receiver in-

cluded with the chest pulse sensor.

1.

Make sure that the power cord is unplugged.

Remove the indicated #8 x 3/4" Screw (12) and the

Access Door (87) from the Console Base (93).

2. Connect the wire on the receiver to the indicated

wire extending from the Console Base (93).

Hold

the receiver so that the small cylinder is ori-

ented as shown and is facing the Console Base.

Attach the receiver to the plastic posts on the

Access Door (87) with the two included small

screws.

3.

Make sure that no wires are pinched.

Reattach

the Access Door (87) with the #8 x 3/4" Screw (12).

Discard the other wires included with the receiver.

Receiver

87

Small

Cylinder

12

93

Wires

Small

Screws

Platform

Cushion

Walking Platform

Increase

Decrease

Platform

Cushion

«
...
20
21
22
23
24
...
»

Содержание 7.0 Crosstrainer





































Отзывы:

Нет отзывов