11. Lower the Uprights (31, 36) as shown.
See the inset drawing.
Position the Uprights
(31, 36) so that the treadmill Frame (74) is cen-
tered between the Uprights.
Firmly tighten the 3/8" x 2 1/2" Bolts (32) and
then the 3/8" x 2 1/4" Bolts (5) on each side of
the treadmill.
Do not overtighten the 3/8" x 2
1/2" Bolts.
36
31, 36
32
74
74
31
View from Above
Side View
11
5
10
22
10. Insert the wires into the Console Base (26) as
you set the Console Base on the Handrails (18).
Be careful not to pinch the wires.
Next, thread
two 1/4" x 1/2" Bolts (22) with 1/4" Star Washers
(21) into the Handrails and the Console Base;
do not tighten the Bolts yet.
Attach the Console Base (26) to the Handrails
(18) with four #8 x 3/4" Screws (2).
Then,
tighten the two 1/4" x 1/2" Bolts (22).
Remove the plastic tie from the right Handrail
(18).
2
22
21
21
2
18
18
10
26
Front View
