![background image](http://html.mh-extra.com/html/pro-form/405-ce-read-drive/405-ce-read-drive_manual_1605313007.webp)
7
3. Orient the Upright (5) and the Top Cover (23)
as shown. Slide the Top Cover upward onto the
Upright.
Have a second person hold the Upright (5) and
the Top Cover (23) near the Frame (1).
Locate the wire tie in the Upright (5). Tie the
lower end of the wire tie to the Wire Harness
(60). Next, pull the upper end of the wire tie until
the Wire Harness is routed through the Upright.
Tip: To prevent the Wire Harness (60) from
falling into the Upright (5), secure the Wire
Harness with the wire tie.
3
1
60
23
5
Wire Tie
Wire Tie
4.
Tip: Avoid pinching the Wire Harness (60).
Insert the Upright (5) into the Frame (1).
Attach the Upright (5) with four M8 x 16mm
Screws (102) and four M8 Split Washers (103).
Do not tighten the Screws yet.
Slide the Top Cover (23) downward;
do not
press the Top Cover fully into place yet.
4
5
Avoid pinching the
Wire Harness (60)
1
102
102
102
102
103
103
23
60
Содержание 405 CE READ DRIVE
Страница 27: ...27 NOTES ...