Pro-Form 1010 ZLT Скачать руководство пользователя страница 22

Страница: 22 / 36

If the speed or incline setting is too high or too low

at any time during the workout, you can manually

override the setting by pressing the Speed or

Incline buttons;

however, when the next segment

of the workout begins, the treadmill will auto-

matically adjust to the speed and incline set-

tings for the next segment.

To stop the workout at any time, press the Stop

button. The time will begin to flash in the display.

To resume the workout, press the Start button or

the Speed increase button. The walking belt will

begin to move at 2 Km/H. When the next segment

of the workout begins, the treadmill will automati-

cally adjust to the speed and incline settings for the

next segment.

4. Follow your progress with the displays.

See step 5 on page 19. If you select a calorie work-

out or a timed workout, the display will show the

time remaining instead of the elapsed time.

5. Measure your heart rate if desired.

See step 6 on page 20.

6. Turn on the fan if desired.

See step 7 on page 20.

7. When you are finished exercising, remove the

key from the console.

See step 8 on page 20.

HOW TO USE AN IFIT LIVE WORKOUT

Note: You must have an iFit Live module to use an iFit

Live workout.

To purchase an iFit Live module at

any time, go to www.iFit.com or call the telephone

number on the front cover of this manual.

To use an iFit Live module, you must have access to a

computer with an internet connection and a USB port.

You will also need an iFit.com membership. To use a

wireless iFit Live module, you must also have your own

wireless network including an 802.11b router with SSID

broadcast enabled (hidden networks are not

supported).

1. Insert the key into the console.

See HOW TO TURN ON THE POWER on page 18.

2. Insert the iFit Live module into the console.

To use an iFit Live workout, the optional iFit Live

module must be inserted in the console.

3. Select a user.

If more than one user is registered, you can switch

users in the iFit Live main screen. Press the in-

crease and decrease buttons next to the Enter but-

ton to select a user.

4. Select an iFit Live workout.

To select an iFit Live workout, press one of the iFit

Live buttons. Note: Before some workouts will

download, you must add them to your schedule on

www.iFit.com.

Press the iFit Live button to download the next

workout in your schedule. Press the My Trainer

button, the My Maps button, the World Tour button,

or the Event Training button to download the next

workout of that type in your schedule. Press the

Compete button to compete in a race that you have

previously scheduled.

For more information

about the iFit Live workouts, please see

www.iFit.com.

Содержание 1010 ZLT





































Результаты поиска

Содержание 1010 ZLT

Отзывы:

Похожие инструкции для 1010 ZLT

Бренды по названию

Популярные бренды

Pro-Form 1010 ZLT, Руководство пользователя

Результаты поиска

Содержание 1010 ZLT

Отзывы:

Похожие инструкции для 1010 ZLT

Бренды по названию

Популярные бренды