Pro Fitness 9283495, Сборка и руководство пользователя

Страница: 21 / 28

A. Attach rear of Seat Pad Support (#4) to the Cross Beam(#3), Align the side hole and secure with
one M10*60MM Hex Bolt(#20), one
Φ10MM Washer(#25) and one M10 Aircraft Nut(#29).Place
an M8*85
mm Carriage Bolt(#19) in the upper hole and secure in position using one Φ8mm
Washer(#23),one Φ8mm Spring Washer(#24) and one M8 Triangle Knob(#28). Tighten securely
to lock the frame in position.
B. Attach Front Stabilizer(#5) to the bottom of the Front Upright Support(#6), Align the hole and
secure with one M8*50MM Carriage Bolt(#17),one
Φ
8MM Washer(#23) and one M8 Aircraft
Nut(#26).
C. Attach the Upright Support(#6) to the front of the Seat Pad Support(#4), Align the side hole and
secure with one M10*60MM Hex Bolt(#20), one
Φ
10mm Washer(#25) and one M10 Aircraft Nut
(#29). Place an M8*55mm Carriage Bolt(#18) in the upper hole and secure in position using one
Φ8mm Washer(#23),one Φ8mm Spring Washer(#24) and one M8 Triangle Knob(#28). Tighten
securely to lock the frame in position.
D. Insert the Leg Developer Support (#7) into the upper openning of the Front Upright Support (#6),
select desired height and secure with one M8 Lock Knob.
E. Attach the Leg Developer(#8) to the Leg Developer Support(#7), Align the hole and secure with
M10*60mm Hex Bolt(#20), one
Φ
10mm Washer(#25) and one M10 Aircraft Nut (#29), attach two
Nut Covers(#22) to the hex head of the BOLT and the NUT.
F. Slide three Foam Roll Tubes (#9) into the hole on the Leg Developer Support (#7) and Leg
Developer (#8) with halfway. Attached six Foam Rolls (#40) to each side of the Foam Roll Tube
(#9).
Assembly Accessories 2
Diagram 2
19
STEP 3 (See Diagram 3)
Part No Description QTY
17 M8*50mm Carriage Bolt 1
18 M8*55mm Carriage Bolt 1
19 M8*85mm Carriage Bolt 1
20 M10*60MM Hex Bolt 3
22 Nut Cover 2
23
Φ
8mm Washer 3
24
Φ
8mm Spring Washer 2
25
Φ10mm Washer 3
26 M8 Aircraft Nut 1
27 M8 Lock Knob 1
28 M8 Triangle Knob 2
29 M10 Aircraft Nut 3
31 Spring Collar 1