7
1
4
Computer Operation
SCAN / TIME / COUNT / CAL /
STEPS/MIN
Function Button
Starting
1. Remove the computer from the counter by disconnecting it from its slot.
2. Install or replace a 1.5V R03P AAA battery, following the polarity instructions in the diagram below.
3. Replace the counter.
4. If the display still does not appear, or is displayed partially, remove the battery, wait 15 seconds and
reinsert it.
5. The display values are automatically reset to zero if you remove the battery.
6. If you do not use the counter for a
long time, remove the battery to
avoid rust forming on the contacts,
which will prevent the machine form
operating correctly.
7. In order to protect the environment,
take the used batteries and deposit
them in a specially designed collection
point.
• Press the button until an indicator appears alongside the function which you want to use.
• NB: press the button for three seconds to reset the counter to zero before each workout.
• To activate the system, press the display button or start the exercises.
• The system will automatically go to standby mode after four minutes if no movement is detected.
STRIDE MIN
: Number of steps per minute. Counts
the number of steps which you make per minute.
SCAN
: automatically displays the TIME, CAL, and
STRIDE MIN functions.
COUNT
: total number of steps. Displays a
cumulative total of the number of steps taken since
S
T
O
P
COUNT
TIME
CAL
STEPS
/MIN
SCAN
Functions
How to replace the battery
your first training session.
TIME
: Displays the time lapsed until 99:59mn.
CAL
: Calculates the estimated calorie loss, set
values for average effort and a person of average
body size and strength.
