Pro-face SP5000 Series, Руководство по установке

Страница: 27 / 31

28
E
ngl
is
h
AUX Connector
AUX Connector
CAUTION
ELECTRIC SHOCK
• Remove the AUX connector from this product prior to wiring.
• Strip wires only to the required length.
• Do not solder the wire itself.
Failure to follow these instructions can result in injury or equipment
damage.
Step Action
1 Insert the screwdriver into the opening button. This will open the
wire’s round-shaped hole.
2 Hold the screwdriver and insert the wire into the wire’s round-
shaped hole.
3 Take out the screwdriver from the opening button. The round-
shaped hole will then close, and the wire will be held securely in
place. To remove the wire, re-insert the screwdriver into the
opening button and when the wire’s spring clamp releases, pull the
wire out.
4 Insert the wired AUX connector into the Auxiliary Output/Speaker
Output Interface (AUX) of this product.