-10-
2) Tilt the maintenance cover up
as shown by arrow a and lift
it out in the direction shown by
arrow b (see diagram).
(Go to step 3.)
3) Insert the HDD unit's cable
connector completely into IDE
I/F 1.
4) Attach the HDD unit using the
four (4) attachment screws. (See
diagram) The torque should be
0.5 to 0.6 N
•
m.
5) Replace the PS-B unit's cover
and reattach all four (4)
attachment screws. The torque
should be 0.6 to 0.8 N
•
m. If you
used the maintenance cover,
replace that cover and fasten the
its two (2) attachment screws.
The torque should be 0.5 to 0.6
N
•
m.
b
a
IDE I/F 1
Cable
HDD unit
Front of
PS-B unit
