13
hard disk is all reset to the original values
at the time of delivery.
"Proceed with disk restore? Destination
drive will be permanently overwritten."
(8) The hard disk recovery program will
start.
After the recovery operation finishes, the
Symantec Ghost™ also will finish. When
the message “Please turn off computer”
displayed, turn off the power of PS-A/
PS-B.
(9) Turn on the power of PS-A/PS-B again
and immediately press the [F2] key to
enter the BIOS setup screen.
(10)Press the [F9] key and select [Yes] for
[Load default configuration now?] to set
the BIOS setting to the factory setting.
Press the [F10] key to save the setting
and restart the PS-A/PS-B unit.
(11)After the unit restarts, set up your OS.
• If the hard disk unit breaks down due to
a hardware problem, (Ex. if BIOS can-
not find the hard disk, if the hard disk's
lifetime expires, or it breaks down),
Symantec Ghost™ cannot recover the
hard disk.
Pro-face recommends that in this case
you contact your local PS-A/PS-B dis-
tributor for instructions about hard disk
recovery or replacement.
• Pro-face does not guarantee the pres-
ervation of any data stored on the HDD
unit if the HDD unit has an accident,
malfunctions or is damaged in any
way. Therefore, the regular backing up
of important HDD unit data to either
floppy disks, or other type of suitable
magnetic media is strongly recom-
mended.
Digital Electronics Corporation
8-2-52 Nanko-higashi
Suminoe-ku, Osaka 559-0031
JAPAN
TEL: +81-(0)6-6613-3116
FAX: +81-(0)6-6613-5888
http://www.pro-face.com/
© Copyright 2007 Digital Electronics
Corporation. All rights reserved.
PFX102485K
.PS345XA-HD40-WXP/ML-MT11
2008.2 JM/A
SEE
Inquiry
Do you have any questions about
difficulties with this product?
Please access our site anytime that
you need help with a solution.
http://www.pro-face.com/otasuke/
Please be aware that Digital Electronics
Corporation shall not be held liable by the
user for any damages, losses, or third
party claims arising from the uses of this
product.
Note
